| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Each Additional | 0.9 | 0.6 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 1.0 | 0.0 | A | |
| Crankshaft, Renew | 3.3 | 0.0 | A | |
| Oil Pump, Renew | 1.7 | 0.0 | A | |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | |
| Rear Main Oil Seal, Renew | 1.8 | 0.0 | A | |
| Timing Belt, Renew | 0.7 | 0.0 | A | |
| Tune-Up | 0.6 | 0.0 | A | |
| Valve Lifters, Renew |
| Front Bank | 0.3 | 0.0 | A | |
| Rear Bank | 0.6 | 0.0 | A | |
| Both Banks | 0.8 | 0.0 | A | |
| Camshaft, Renew |
| Front | 1.1 | 0.0 | A | |
| Rear | 1.1 | 0.0 | A | |
| One CYL |
| Front Bank | 7.3 | 5.2 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Rear Bank | 8.0 | 5.6 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 8.8 | 6.4 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Note |
| With AC, Add | 0.4 | 0.2 | A | |
| To Grind Valves, Add |
| One Bank | 2.5 | 1.8 | A | |
| Both Banks | 5.0 | 3.6 | A | |
| To Replace Piston Rings, Add | 3.5 | 2.5 | A | |