Power Window Switch: Service and Repair

Removal
To remove the power window switches, open the center console and remove the two screws that attach the power window switch bezel to the console. Remove two more screws at the front edge of the power window switch bezel. Use a small flat bladed screwdriver to release the latch on the wiring harness. Remove the wiring harness by carefully prying between the back of the switch and the wiring harness. Remove the screws that secure the window switch to the bezel, and remove the switch from the bezel.

Installation
Secure the power window switch to the bezel with the original screws. Press the wiring harness onto the back of the power window switch, making sure that the lock tabs completely engage. Secure the bezel to the center console with screws at the front and rear edges.