Manifold Pressure/Vacuum Sensor: Description and Operation

Manifold Absolute Pressure (MAP) Sensor:

The Manifold Absolute Pressure (MAP) sensor is used to monitor manifold vacuum (engine load). It sends voltage signals to the engine controller that represent the engine's varying load conditions. The MAP sensor is mounted directly into the intake plenum, and is connected to the engine controller via an electrical connector. Changes in manifold absolute pressure are determined by driver demand (amount of throttle). Changes in manifold absolute pressure are sensed by a silicon crystal, in the MAP sensor. This crystal changes the resistance of the sensor depending upon the manifold absolute pressure acting upon it, and the change in resistance affects the amount of voltage that the sensor allows to flow back to the engine controller. The engine controller uses this information and other input signals to make decisions as to what output devices need to be adjusted to improve the driving conditions or emission levels.

The relationship between the resistance of the MAP sensor and the manifold absolute pressure is inversely proportional (as the manifold absolute pressure increases, low vacuum, the resistance of the sensor decreases and vice versa). The relationship between the manifold absolute pressure of the MAP sensor and the voltage returned to the engine controller is directly proportional (As manifold absolute pressure increases, low vacuum, the voltage returned to the engine controller increases and vice versa).

The voltage supplied to the MAP sensor from the engine controller is 5 volts, and its voltage range is .5 to 5 volts. .5 to 1.5 volts indicates a high vacuum situation such as idle or deceleration. 1.5 to 3.0 volts indicates a medium level of vacuum such as a cruise or slight acceleration condition. 3.0 to 4.5 volts indicates a low vacuum situation such as hard acceleration or a mechanical failure. Any reading of 0 volts or over 5 volts indicates a problem. Refer to specification chart in ELECTRICAL SPECIFICATIONS.