Headlamp Switch: Service and Repair

Disable airbag, refer to Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair. After procedure has been completed, rearm airbag system.

1. Disconnect battery ground cable.
2. Remove left trim bezel as follows:
a. Pull bezel rearward until retaining clips disengage.
3. Remove three headlight switch attaching screws.
4. Pull switch assembly and wiring away from instrument panel, then disconnect wiring connector.
5. Disconnect escutcheon from mounting plate.
6. Unscrew bracket retainer nut attaching switch to bracket, then remove switch.
7. Reverse procedure to install.