Fuel Tank Pressure Release Valve: Service and Repair

Pressure Relief/Roll Over Valve:

REMOVAL
1. Remove the fuel filler cap, and release fuel system pressure. Service and Repair
2. Remove the fuel tank.
3. Slide the blade of a screwdriver between the rubber mounting grommet and the fuel tank, making sure not to slide the screwdriver between the rollover valve and grommet. Use a second screwdriver to brace the first and pry the rollover valve out of the tank.
4. Remove the grommet from the valve, and make sure there is no damage or wear evident on the grommet. If grommet is worn it must be replaced.

Pressure Relief/Rollover Valve:

INSTALLATION
1. Install the rubber grommet into the fuel tank, and seat it around the curled lip of the tank.
2. Lubricate the grommet with power steering fluid only, and push rollover valve into grommet until properly seated. Twist grommet if necessary to align in correct position.
3. Install fuel tank.