Headliner: Service and Repair

1. Position front seats in full reclining position.
2. With assistance load headliner through front or rear door.
3. Position headliner to roof, thread console wiring connector for console lamp through hole in headlining panel.
4. Position headliner at rear, apply force up, attaching velcro strips on each side.
5. Position and align sun visors.
6. If equipped with vanity mirror, connect vanity light terminal to body wiring terminal and tuck terminal excess wiring up in hole in roof inner panel.
7. Secure sun visors.
8. Position and secure necessary garnish mouldings.
9. For removal reverse above procedure.