NS-11C Injector 3 & 4 Control Circuit

Complete No Start Test 11, Step A, before proceeding.

1. With diagnostic read-out tool connected to engine test connector, SMEC 60-way electrical connector disconnected, connect one end of a jumper wire to terminal No. 32 of 60-way electrical connector.
2. Depress and hold ATM button on read-out tool and contact other end of jumper wire to battery positive terminal.
3. If injector 3 and 4 click, replace SMEC.
4. If injectors 3 and 4 do not click, proceed to Test 11 step D.