Radio/Stereo: Service and Repair

1. Open rear console accessory box cover, then remove inner box.
2. Remove power window switch panel and cover, if equipped.
3. Remove rear console box attaching screws, then the box.
4. Insert a suitable screwdriver into space between cover and rear console tray, then twist screwdriver and remove tray.
5. Pull out ashtray.
6. Remove rear console tray attaching screws, then the rear console box.
7. Remove console side cover attaching screws from under instrument panel, then the side covers by pushing downward and slightly forward, and bracket.
8. Remove radio panel, then the radio from console box.
9. Reverse procedure to install.