Horizon and Omni

1. Switch location access - on four-door vehicles remove the grille. On two-door vehicles the location can be accessed from under the hood.

FIGURE 2 - WIRE ROUTING:

2. Mount switch in location as detailed in Figure 2.

FIGURE 6 - WIRE ROUTING:

3. Route wiring and install the straps as detailed in Figure 6.
4. Disconnect one side of the A/C cycling clutch switch. Connect female end of A/C ambient temperature switch to A/C cycling clutch switch. Connect male end of A/C ambient temperature switch to connector previously removed from A/C cycling clutch switch.

5. Check system for proper operation.