Lancer and Lebaron GTS

1. Switch location access - location can be accessed from underside of fascia.

FIGURE 3 - SWITCH LOCATION:

2. Drill 1/4" clearance hole and mount switch as detailed in Figure 3.

FIGURE 5 - WIRE ROUTING:

3. Route wiring and install the straps as detailed in Figure 5.
4. Disconnect one side of the A/C cycling clutch switch. Connect female end of A/C ambient temperature switch to A/C cycling clutch switch. Connect male end of A/C ambient temperature switch to connector previously removed from A/C cycling clutch switch.

5. Check systerm for proper operation.