Daytona and Laser

1. Switch location access - on all vehicles (except Turbo Z) location can be accessed from underside of fascia. Turbo Z must be accessed through rectangular access hole at bottom of fascia.

FIGURE 1:

2. Mount switch in location as detailed in Figure 1.

FIGURE 2 - WIRE ROUTING:

3. Route wiring and install tie straps as detailed in Figure 5.
4. Disconnect one side of the A/C cycling clutch switch. Connect female end of A/C ambient temperature switch to A/C cycling clutch switch. Connect male end of A/C ambient temperature switch to connector previously removed from A/C cycling clutch switch.
5. Check system for proper operation.