Fuel Pressure Relief (High Side)

Fuel Pressure Relief (High Side)

Warning

Fuel that flows out at high pressure can cause serious injury to the skin and eyes. ALWAYS depressurize the fuel system before removing components that are under high fuel pressure.

Note: If a scan tool is not available, WAIT at LEAST 2 hours after the engine has been run, before removing the high pressure fuel line.

1. Remove the fuel pump module 20A fuse from the underhood electrical center.

2. Start the vehicle and allow the engine to idle until the engine stops. The engine will stop in approximately 20-30 seconds.

3. Turn the ignition OFF.