Front Door Window Glass: Service and Repair

Front Side Door Window Replacement

Removal Procedure





1. Place the front door window in the full down position.

2. Remove the inner front door trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair.

3. Remove the front door water deflector.

4. Lower the window (2) to the center of the inner door panel, align the bolts with the access.

5. Remove the window guide bolts (1) from the window regulator.

6. Slide the window (2) down and out of the primary glass channels.

7. Remove the window by tilting outboard and pulling the window out of the door through the door belt opening.

Installation Procedure





1. Install the window (2) by sliding the window into the door through the outside door belt opening.

2. Install the window into the primary glass channels and rest the window on the regulator guide plate.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the window guide bolts (1) to the regulator. Tighten the bolts to 10 Nm (89 lb in).

4. Install the front door water deflector.

5. Install the front inner door trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair.

6. Inspect the door window for proper operation before installing the door trim panel.