VIN 6

Fuel Pressure Relief Valve Replacement

Removal Procedure

1. Remove the engine cover. Refer to Engine Cover Replacement (Service and Repair).
2. Remove the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (Glow Plug Control Module Replacement).




3. Remove the fuel pressure relief valve from the left fuel rail.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the fuel pressure relief valve to the left fuel rail and tighten to 100 Nm (74 lb ft).
2. Install the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (Glow Plug Control Module Replacement).
3. Prime the fuel system. Refer to Fuel System Priming (Fuel System Priming).
4. Start the engine.
If the engine does not start, repeat the above step.
5. Inspect the fuel system for leaks.
6. Install the engine cover. Refer to Engine Cover Replacement (Service and Repair).