Fuel Injection Fuel Feed Front Pipe Replacement - Left Side

Fuel Injection Fuel Feed Front Pipe Replacement - Left Side

Removal Procedure

1. Remove the air conditioning (A/C) compressor.
2. If equipped, remove the auxiliary generator. Refer to Auxiliary Generator Replacement (KD9) (Auxiliary Generator Replacement (KD9)).




3. Disconnect the fuel feed pipe fitting from the fuel injector pump.
4. Disconnect the fuel feed pipe fitting from the left fuel rail.
5. Remove the left fuel feed pipe.

Installation Procedure




1. Install the left fuel feed pipe.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Connect the fuel feed pipe fitting to the left fuel rail and tighten to 41 Nm (30 lb ft).
3. Connect the fuel feed pipe fittings to the fuel injector pump and tighten to 41 Nm (30 lb ft).
4. If equipped, install the auxiliary generator. Refer to Auxiliary Generator Replacement (KD9) (Auxiliary Generator Replacement (KD9)).
5. Install the A/C compressor.
6. Prime the fuel system. Refer to Fuel System Priming (Fuel System Priming).
7. Start the engine.
If the engine does not start, repeat the above step.
8. Inspect the fuel system for leaks.