VIN 6

Crankshaft Balancer Replacement

Special Tools

J 44643 Flywheel Holding Tool

Removal Procedure




1. Remove the starter. Refer to Starter Replacement (V8) (Service and Repair)Starter Replacement (V6) (Service and Repair)Starter Replacement (Diesel) (Service and Repair).
2. Install the J 44643 (2) in order to hold the flywheel (1).
3. Remove the radiator fan clutch assembly. Refer to Fan Clutch Replacement (Service and Repair).
4. Remove the drive belt. Refer to Drive Belt Replacement (Service and Repair).




5. Remove the crankshaft balancer bolt.
6. Remove the crankshaft balancer.

Installation Procedure




1. Lightly lubricate the crankshaft balancer internal hub with engine oil.
2. Install the crankshaft balancer to the crankshaft.
3. Lightly lubricate the crankshaft balancer bolt with engine oil.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the crankshaft balancer bolt and washer.

1. Tighten the bolt a first pass to 100 Nm (74 lb ft).
2. Tighten the bolt a second pass an additional 105 degrees.




5. Install the radiator fan clutch assembly. Refer to Fan Clutch Replacement (Service and Repair).
6. Install the drive belt. Refer to Drive Belt Replacement (Service and Repair).
7. Remove the J 44643 (2).
8. Install the starter. Refer to Starter Replacement (V8) (Service and Repair)Starter Replacement (V6) (Service and Repair)Starter Replacement (Diesel) (Service and Repair).