Transmission Rear Mount Bracket Replacement

Transmission Rear Mount Bracket Replacement

Removal Procedure

1. Remove the rear transaxle mount. Refer to Transmission Rear Mount Replacement (Transmission Rear Mount Replacement) .




2. Remove the rear transaxle mount bracket to transaxle bolts.
3. Remove the rear transaxle mount bracket from the transaxle.



Installation Procedure





1. Install the rear transaxle mount to transaxle.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Using the following sequence, install the rear transaxle mount bracket bolts:

1. Tighten the middle bolt to 90 N.m (66 lb ft).
2. Tighten the lower bolt to 90 N.m (66 lb ft).
3. Tighten the upper bolt to 90 N.m (66 lb ft).


3. Install the rear transaxle mount. Refer to Transmission Rear Mount Replacement (Transmission Rear Mount Replacement) .