Installation

Installation






1. Mount the EGR valve.
- Insert the gasket and temporarily fit the EGR valve.

NOTE: Temporarily tighten the bolts.

2. Install the EGR cooler.
- Temporarily fit the EGR cooler to the bracket.

NOTE: Temporarily tighten the bolts.

3. Install the EGR adapter.
- Temporarily fit the EGR adapter between the EGR cooler and exhaust manifold.

NOTE: Temporarily tighten the bolts.

4. Install the EGR pipe.
- Insert the gasket between the two ends of the EGR pipe and temporarily fit it.

NOTE: Temporarily tighten the bolts.

During temporary assembly, tighten the nuts and bolts to the specified torque in the order shown in the illustration.



Tightening torque
1: 31 N-m (23 lb ft)
2, 4 ALL: 28 N-m (21 lb ft)
3, 5, 6, 7, 8, 9 ALL: 24 N-m (17 lb ft)