Seat Cushion Cover and Pad Replacement - Rear (Bench)

Seat Cushion Cover and Pad Replacement - Rear (Bench)

Removal Procedure




1. Remove the rear seat from the vehicle.
2. Remove the J-Clips from the back of the seat.
3. Remove the bolts (2) from the grab handle (1).




4. Remove the support rod (1) from the bottom of the seat.




5. Loosen the bolts (1) on the roller assembly (2) but do not remove.
6. Remove the seat cushion cover and pad from the seat frame.

Installation Procedure




1. Install the seat cushion cover and pad to the seat frame.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts (1) on the roller assembly (2).

Tighten the bolts to 53 N.m (39 lb ft).




3. Install the support rod (1) to the bottom of the seat.




4. Install the bolts (2) to the grab handle (1).

Tighten the bolts to 30 N.m (22 lb ft).

5. Install the J-Clips on the back of the seat.
6. Install the rear seat to the vehicle.