Transfer Case Speed Sensor Replacement - Left Rear

Transfer Case Speed Sensor Replacement - Left Rear
Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the left rear speed sensor electrical connector (4).





3. Remove the left rear speed sensor.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the left rear speed sensor.
^ Tighten the speed sensor to 15 Nm (11 ft. lbs.).





2. Connect the left rear speed sensor electrical connector (4).
3. Lower the vehicle.