Air Cleaner Fresh Air Duct/Hose: Service and Repair

AIR CLEANER OUTLET DUCT REPLACEMENT

REMOVAL PROCEDURE




1. Loosen the outlet duct clamps at the air cleaner assembly and the turbocharger.
2. Remove the air cleaner outlet duct.

INSTALLATION PROCEDURE




1. Install the air cleaner outlet duct.

IMPORTANT: The air cleaner outlet duct must be fully seated against the positive stop feature on the turbocharger inlet.

NOTE: Refer to Fastener Notice.

2. Tighten the outlet duct clamps at the turbocharger and the air cleaner assembly.

Tighten the clamps to 4 N.m (35 lb in).