112. Exhaust Gas Recirculation Valve and Cooler Installation

EGR and Cooler Installation





1. Install the intake manifold tube.





2. Install the EGR cooler bracket.
3. Install the EGR cooler bracket bolts.
^ Tighten the EGR cooler bracket bolts to 25 Nm (18 ft. lbs.).





4. Install the EGR and cooler.





5. Install the EGR mount bolt.
^ Tighten the EGR mount bolt to 50 Nm (37 ft. lbs.).





6. Install the top EGR cooler bolts.
^ Tighten the top EGR cooler bolts to 25 Nm (18 ft. lbs.).





7. Install the air inlet tube.
8. Install the air inlet tube nuts.
^ Tighten the air inlet tube nuts to 25 Nm (18 ft. lbs.).





9. Install the air inlet tube to intake manifold tube bolt and nut.
^ Tighten the air inlet tube to intake manifold tube bolt and nut to 25 Nm (18 ft. lbs.).