Oil Level Indicator and Tube Replacement

Oil Level Indicator and Tube Replacement
Removal Procedure





1. Remove the oil level indicator.
2. Remove the exhaust manifold.
3. Remove the starter motor.
4. Remove the oil level indicator tube bolt at the indicator tube bracket.
5. Remove the oil level indicator tube and O-ring seals.
6. Remove and discard the O-ring seals.

Installation Procedure





1. Install NEW O-ring seals onto the oil level indicator tube.
2. Lightly lubricate the O-ring seals with engine oil.
3. Install the oil level indicator tube.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the oil level indicator tube bolt at the indicator tube bracket.
^ Tighten the bolt to 21 Nm (15 ft. lbs.).
5. Install the starter motor.
6. Install the exhaust manifold.