Transfer Case Output Shaft Seal Replacement - Front

Transfer Case Output Shaft Seal Replacement - Front
^ Tools Required
- J 8092 Driver Handle
- J 43484 Output Shaft Seal Installer

Removal Procedure





1. Remove the transfer case shield, if equipped.
2. Remove the front propeller shaft.
3. Insert a flat-tipped screwdriver into the inner race.
4. Pry the inner race back.





5. Insert a small pry bar into the inner race.





6. Remove the inner part of the seal.





7. Insert a flat-tipped screwdriver or small pry bar in the space between the outer race of the seal and the transfer case.





8. Remove the outer part of the seal.

Installation Procedure





1. Install the J 43484 (2) to the J 8092 (1).
2. Install the seal onto the J 43484 (2).
3. Using the J 43484 (2) and the J 8092 (1), install the seal.
4. Install the front propeller shaft.
5. Check the fluid level, add fluid if necessary.
6. Install the transfer case shield, if equipped.