Transmission Fluid Auxiliary Cooler Replacement

Transmission Fluid Auxiliary Cooler Replacement

Removal Procedure





1. Remove the front grill assembly.
2. Place a drain pan under the vehicle.
3. Disconnect the transmission oil cooler lines from the auxiliary cooler.
4. Remove the auxiliary oil cooler bolts (1) and push pins (2).
5. Remove the auxiliary oil cooler from the vehicle.

Installation Procedure





1. Install the auxiliary oil cooler to the vehicle.

2. Install the bolts (1) and the push pins (2) that retain the auxiliary oil cooler to the radiator brace.
^ Tighten the bolts to 12 Nm (106 inch lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

3. Connect the transmission oil cooler lines to the auxiliary cooler.
4. Install the front grill assembly.
5. Check and add transmission fluid as necessary.