Air Distributor Duct Replacement

AIR DISTRIBUTOR DUCT REPLACEMENT

REMOVAL PROCEDURE
1. Remove the IP carrier.




2. Remove the air distribution duct retaining screws.
3. Remove the air distribution duct.

INSTALLATION PROCEDURE




1. Install the air distribution duct.
2. Install the air distribution duct retaining screws.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Tighten the screws.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

4. Install the IP carrier.