FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Chevy Truck >> 2006 >> Silverado 2500 4WD V8-6.0L (CNG) >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Door >> Air Door Actuator / Motor >> Service and Repair >> Mode Actuator (Without RPO Code D07)

Mode Actuator (Without RPO Code D07)



MODE ACTUATOR REPLACEMENT (WITH RPO CODE D07)

REMOVAL PROCEDURE




1. Remove the floor air outlet duct extension (1) from the floor duct (2).
2. Remove the body control module.




3. Disconnect the electrical connection at the mode actuator (10).




4. Remove the mode actuator mounting screws from the HVAC module.
5. Remove the mode actuator as an assembly with the actuator cam.

INSTALLATION PROCEDURE




1. Install the mode actuator as an assembly with the actuator cam.
- Line up the heater/defroster lever with the mode actuator cam slot.
- Line up the A/C lever with the mode actuator cam.
2. Install the mode actuator mounting screws to the HVAC module.

Tighten the screws to 1.6 N.m (14 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.




3. Connect the electrical connection at the mode actuator (10).




4. Install the body control module.
5. Install the floor air outlet duct extension (1) to the floor air duct (2).
pro multis Credits:Operation CHARM About Operation CHARM