89. Clutch Pilot Bearing Installation

CLUTCH PILOT BEARING INSTALLATION

Special Tools
J 8433 Two Jaw Puller
J 45949 Pilot Bearing and Flywheel Locator Installer






1. Position the bearing to the rear of the crankshaft.
2. Assemble the J 8433 two jaw puller (2), the J 45949 pilot bearing and flywheel locator installer (1) and bolts to the rear of the crankshaft.

Tighten the bolts until snug.

3. Rotate the bolt of the J 8433 two jaw puller (2) until the bearing is seated in the bore of the crankshaft.
4. Remove the tools.






5. Inspect the clutch pilot bearing for proper installation.