Park Brake Cable Replacement - Intermediate (W/Rear Drum)

Park Brake Cable Replacement - Intermediate (w/Rear Drum)

Removal Procedure





1. Ensure that the park brake is released.
2. Raise and support the vehicle.
3. Relieve tension on the park brake cables by pulling down on the front park brake cable (1) just in front of the equalizer.
4. Remove the park brake cables (2, 3) from the equalizer bar.





5. Disconnect the intermediate cable from the front cable.
6. Remove the intermediate cable from the vehicle.

Installation Procedure





1. Install the intermediate cable to the vehicle.
2. Connect the intermediate cable to the front cable.





3. Install the park brake cables (2, 3) to the equalizer.
4. Lower the vehicle.
5. Adjust the park brakes.