PTO Cover Gasket Replacement

PTO Cover Gasket Replacement
Removal Procedure





1. Remove 6 bolts (3).
2. Remove the power take-off (PTO) cover (2) and gasket (1). Discard the used gasket.
3. Ensure the PTO gasket face on the transmission case is free of all foreign material, nicks and scratches.

Installation Procedure





1. Install the new PTO cover gasket (1) and cover (2).

2. Start the top-center bolt (3) first. Install the other 5 bolts.
^ Tighten all bolts to 43 Nm (32 ft. lbs.).

Notice:
Refer to Fastener Notice in Service Precautions.