Front Suspension

Spring Bumper Replacement

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Unsnap the spring bumper from the mounting cup. For 4WD 15-Series and 2WD 25/35-Series.





3. Remove the nut from the spring bumper stud. For 4WD 15-Series and 2WD 25/35-Series.
4. Remove the spring bumper.

Installation Procedure





1. Snap the spring bumper to the mounting cup. For 4WD 15-Series and 2WD 25/35-Series.





2. Install the spring bumper. For 4WD 15-Series and 2WD 25/35-Series.

3. Install the nut to the spring bumper stud.
^ Tighten the nut to 30 Nm (22 ft. lbs.).

Notice:
Refer to Fastener Notice in Service Precautions.

4. Remove the safety stands.
5. Lower the vehicle.