Air Temperature Actuator - Left

AIR TEMPERATURE ACTUATOR REPLACEMENT - LEFT

REMOVAL PROCEDURE
1. Remove the center console, if equipped.
2. Remove the instrument panel (I/P) insulator panel.




3. Disconnect the electrical connector (1) from the left air temperature actuator (2).
4. Remove the screws from the left air temperature actuator (2).
5. Remove the left air temperature actuator (2) from the HVAC module assembly (3).

INSTALLATION PROCEDURE




1. Install the left air temperature actuator (2) to the HVAC module assembly (3).
2. Install the screws to the left air temperature actuator (2).

Tighten the screws to 2 N.m (18 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the electrical connector (1) to the left air temperature actuator (2).
4. Install the I/P insulator panel.
5. Install the center console, if equipped.
6. Reprogram the left air temperature actuator. Refer to Re-Calibrating Actuators.