Remote Power Steering Fluid Reservoir Replacement

Remote Power Steering Fluid Reservoir Replacement

Removal Procedure
1. Siphon the power steering fluid from the reservoir.





2. Disconnect the reservoir outlet hose from the reservoir.





3. Remove the reservoir inlet hose (3) from the reservoir.





4. Remove the power steering pump remote reservoir mounting nuts (4).
5. Remove the power steering pump remote reservoir (3).

Installation Procedure





1. Install the power steering pump remote reservoir (3) to the vehicle.

2. Notice:
Refer to Fastener Notice in Service Precautions.

Install the power steering pump remote reservoir (4) mounting nuts.

Tighten the nuts to 7 Nm (58 inch lbs.).





3. Install the reservoir inlet hose (3) to the reservoir.





4. Connect the reservoir outlet hose to the reservoir.
5. Bleed the power steering system. Refer to Bleeding the Power Steering System.