Auxiliary Battery Positive Cable Replacement

BATTERY POSITIVE CABLE REPLACEMENT (SECONDARY)

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution.




1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the auxiliary battery negative cable (2).
3. Unsnap the positive battery cable cap.
4. Disconnect the positive battery cable (1).




5. Remove the auxiliary positive cable from the junction block.




6. Remove the cable clip bolt (5) at the frame.
7. Remove the auxiliary battery cable.

INSTALLATION PROCEDURE




1. Install the auxiliary battery cable.




2. Connect the positive battery cable (1).

Tighten the bolt to 17 N.m (13 lb ft).

NOTE: Refer to Fastener Notice.

3. Tighten the auxiliary positive cable to the junction block.
4. Snap the positive battery cable cap closed.
5. Connect the auxiliary battery negative cable (2).
6. Lower the vehicle.