No. 5 Right Rear

SEAT BELT RETRACTOR REPLACEMENT - NO. 5 RIGHT REAR

REMOVAL PROCEDURE




1. Remove the rear corner garnish molding.
2. Remove the seat belt retractor bolts (1).
3. Remove the seat belt retractor from the vehicle.

INSTALLATION PROCEDURE




1. Install the seat belt retractor to the vehicle.
2. Install the seat belt retractor bolts (1).

Tighten the seat belt retractor bolt to 52 N.m (38 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the rear corner garnish molding.