Fuel Feed Pipe Replacement

FUEL FEED PIPE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the exhaust gas recirculation (EGR) cooler.




2. Reposition the EGR coolant pipe hose clamp.
3. Remove the EGR coolant pipe hose.
4. Remove the EGR coolant pipe bolts.
5. Remove the EGR coolant pipe.




6. Remove the fuel feed pipe nut and clip bolts.
7. Remove the fuel feed pipe.

INSTALLATION PROCEDURE




1. Install the fuel feed pipe.
2. Install the fuel feed pipe nut and clip bolts.

NOTE: Refer to Fastener Notice.

Tighten the bolts/nut to 41 N.m (30 lb ft).




3. Install the EGR coolant pipe.
4. Install the EGR coolant pipe bolts.

Tighten the bolts to 25 N.m (18 lb ft).

5. Install the EGR coolant pipe hose.
6. Position the EGR coolant pipe hose clamp.




7. Install the EGR cooler.
8. Prime the fuel system. Refer to Fuel System Priming.
9. Start the engine. If the engine stalls, repeat the above step.
10. Once the engine starts, inspect for fuel leaks.