Air Temperature Actuator - Auxiliary

AIR TEMPERATURE ACTUATOR REPLACEMENT - AUXILIARY

REMOVAL PROCEDURE
1. Remove the left rear quarter trim panel.
2. Disconnect the electrical connector from the air temperature actuator.
3. Remove the retaining screws from the air temperature actuator.




4. Remove the air temperature actuator.

INSTALLATION PROCEDURE




1. Install the air temperature actuator.
2. Install the retaining screws to the air temperature actuator.

Tighten the screws to 1.9 N.m (17 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Connect the air temperature electrical connector to the actuator.
4. Install the left rear quarter trim panel.