Exhaust Pipe/Muffler Hanger: Service and Repair

Exhaust System Insulator, Hanger, Bracket Replacement (6.6L Engine with RPO YF2)
Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the exhaust muffler hanger nuts.
3. Remove the hanger from the hanger insulator.

Installation Procedure





1. Install the hanger into the hanger insulator.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the exhaust muffler hanger nuts.
Tighten the nuts to 50 Nm (39 ft. lbs.).
3. Lower the vehicle.