Drive Belt Tensioner: Service and Repair

Drive Belt Tensioner Replacement
Removal Procedure
1. Remove the upper radiator fan shroud.





2. Remove the drive belt.
3. Remove the drive belt tensioner bolt.
4. Remove the drive belt tensioner.

Installation Procedure





1. Install the drive belt tensioner. Align the pin with the hole in the generator bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the drive belt tensioner bolt.
Tighten bolt to 50 Nm (37 ft. lbs.).
3. Install the drive belt.
4. Install the upper radiator fan shroud.