Seat Back Hinge/Recliner Mechanism Replace - Front

SEAT BACK HINGE/RECLINER MECHANISM REPLACE - FRONT

REMOVAL PROCEDURE
The front seat back recliner mechanism is mounted to the inboard side of the seat.
1. Remove the seat from the vehicle.
2. If removing the recliner mechanism remove the seat back recliner handle.




3. Remove the seat cushion cover enough to access the bolts that retain the hinge or recliner mechanism (6) to the seat cushion frame.
4. Remove the seat back cover enough to access the bolts (2,8) that retain the hinge or recliner mechanism to the seat back.
5. Remove the bolts (2,8) that retain the hinge/recliner mechanism to the seat back frame.
6. Remove the bolts (3,7) that retain the hinge/recliner mechanism to the seat cushion frame.
7. Remove the hinge/recliner mechanism from the seat assembly.

INSTALLATION PROCEDURE




1. Position the hinge/recliner mechanism (6) to the seat assembly.
2. Install the bolts (2,8) to retain the hinge/recliner mechanism (6) to the seat back frame.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 32 N.m (24 lb ft).

3. Install the bolts (3,7) to retain the hinge/recliner mechanism (6) to the seat cushion frame.

Tighten the bolts to 32 N.m (24 lb ft).

4. Install the front seat back cover.
5. Install the front seat cushion cover.
6. Install the seat back recliner handle if recliner mechanism was removed.
7. Install the seat to the vehicle.