Seat Back Frame: Service and Repair

SEAT BACK FRAME REPLACEMENT - FRONT

REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the seat back cover and pad.




3. Remove the bolts (2,8) from the recliners on the right and left side.
4. Remove the seat back frame.

INSTALLATION PROCEDURE




1. Position the seat back frame to the seat assembly.
2. Install the bolts (2,8) to the recliners on the right and left side.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts (2,8) to 32 N.m (24 lb in).

3. Install the seat back cover and pad.
4. Install the seat in the vehicle.