Removal

Fuel Rail

Removal

1. Remove the air intake pipe.
- Disconnect the connector for the intake air temperature sensor.







2. Remove the fuel leak off hose from the leak off pipe.
- Cover the removed fuel hose with a lid, keep it facing upward and secure it using wire, etc.

3. Disconnect the connector of fuel rail pressure sensor, and all the connectors.
4. Remove the EGR valve and the EGR adapter.
5. Tape the EGR case holes shut to prevent the entry of foreign material.







6. Remove the injection pipe clip and remove the injection pipes.







7. Remove the fuel pipe.
8. Remove the clip and the fuel leak off pipe.







9. Remove the fuel rail and the fuel rail bracket.
- Should not have the flow damper, pressure limiter and pressure sensor. Should always have the fuel rail.
- Take care not to damage the connector unit of the pressure sensor.