Torque Converter Cover: Service and Repair

Torque Converter Cover Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Remove the transaxle brace (4).





3. Remove the torque converter cover bolts.
4. Remove the torque converter cover.

Installation Procedure





1. Install the torque converter cover.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the torque converter cover bolts.
^ Tighten the bolts to 10 Nm (89 inch lbs.).





3. Install the transaxle brace (4).
4. Lower the vehicle.