Air Compressor Shield Replacement

Air Compressor Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Lower the automatic level control (ALC) air compressor assembly.
3. Remove the ALC compressor relay.





4. Remove the ALC shield bolt (1) and retainers.
5. Remove the ALC shield (2) from the vehicle.

Installation Procedure
1. Install the ALC shield (2) onto the vehicle.
2. Install the ALC relay onto the vehicle.





Notice: Install the ALC shield bolt (1) and retainers to the vehicle.

3. Tighten the bolts to 6 Nm(53 inch lbs.).
4. Install the ALC compressor assembly onto the vehicle.
5. Lower the vehicle.