Evaporative Emission (EVAP) Canister Replacement (Long Wheel Base)

EVAPORATIVE EMISSION (EVAP) CANISTER REPLACEMENT (LONG WHEEL BASE)

REMOVAL PROCEDURE
1. Remove the fuel tank.




2. Disconnect the evaporative emission (EVAP) canister vent pipe (6) from the EVAP canister (2).
3. Disconnect the EVAP canister vapor pipe from the EVAP canister.
4. Disconnect the EVAP canister purge pipe from the EVAP canister.
5. Remove the EVAP canister (2) from the fuel tank.

INSTALLATION PROCEDURE




1. Position and push the EVAP canister (2) into the EVAP canister bracket of the fuel tank.

IMPORTANT: High resistance is normal when installing the EVAP canister.

2. Pull up on the EVAP canister (2) to ensure a proper lock to the fuel tank bracket.
3. Connect the EVAP canister purge pipe to the EVAP canister.
4. Connect the EVAP canister vapor pipe to the EVAP canister.
5. Connect the EVAP canister vent pipe (6) to the EVAP canister (2).
6. Install the fuel tank.