Idle Speed/Throttle Actuator - Electronic: Service and Repair

IDLE AIR CONTROL (IAC) VALVE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the electrical connector from the idle air control (IAC) valve.
2. Remove both attaching bolts (3).
3. Remove the IAC valve (2).

INSTALLATION PROCEDURE




1. Install a new O-ring (4).
2. Install the IAC valve (2).
3. Tighten both attaching bolts (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 3.5 N.m (30 lb in).

4. Reconnect electrical connector.