Seat Cushion Support Replacement - Rear
SEAT CUSHION SUPPORT REPLACEMENT - REARREMOVAL PROCEDURE
1. Gently pry and remove the rear seat hinge support cover (2) from the rear seat hinge support (1).
2. Remove the rear seat stopper rod nut (1) from the rear seat hinge support pin (4).
3. Remove the support pin (4) from the rear seat support (2).
4. Remove the 2 bolts (3) which secure the rear seat support (2).
5. Remove the support (2) from the vehicle.
INSTALLATION PROCEDURE
1. Install the rear seat support (2) to the vehicle. Secure the support with 2 bolts (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the rear seat support bolts to 25 N.m (19 lb ft).
2. Secure the rear seat cushion (5) to the support (2) with the rear seat hinge support pin (4).
3. Install the rear seat stopper rod nut (1) to the support pin (4).
4. Install the rear seat hinge support cover (2) to the support (1).