Front Seat Back Replacement

Front Seat Back Replacement

Removal Procedure




1. Remove the front seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
2. Remove the front seat inner adjuster finish cover. Refer to Driver or Passenger Seat Inner Adjuster Finish Cover Replacement (Driver or Passenger Seat Inner Adjuster Finish Cover Replacement).
3. Remove the front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (Driver or Passenger Seat Outer Adjuster Finish Cover Replacement).
4. Release the J-retainer (2) on the bottom of the seat back cushion (1) which secures the cushion around the seat adjuster lateral rod (3).




5. Remove the 2 bolts (2) which secure each seat adjuster (3) to the seat back cushion (1).
6. Remove the seat back cushion (1) from the front seat.

Installation Procedure





Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the seat back cushion (1) to the front seat. Secure the cushion to each seat adjuster (3) with the 2 mounting bolts (2).

Tighten the front seat back cushion mounting bolts to 35 Nm (25 lb ft).




2. Secure the J-retainer (2) on the bottom of the seat back cushion (1) which secures the cushion around the seat adjuster lateral rod (3).
3. Install the front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (Driver or Passenger Seat Outer Adjuster Finish Cover Replacement).
4. Install the front seat inner adjuster finish cover. Refer to Driver or Passenger Seat Inner Adjuster Finish Cover Replacement (Driver or Passenger Seat Inner Adjuster Finish Cover Replacement).
5. Install the front seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).