Heated and Cooled Seat Switch Replacement (Front-Platinum Models)

HEATED AND COOLED SEAT SWITCH REPLACEMENT (FRONT-PLATINUM MODELS)

REMOVAL PROCEDURE
1. Remove the floor console bezel.




2. Remove the three retaining screws.
3. Remove the switch assembly from the console bezel.

INSTALLATION PROCEDURE




1. Install the switch assembly to the bezel.
2. Install the three retaining screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to ___Nm (__lb in).

3. Install the floor console bezel.