B1645
DTC B1645CIRCUIT DESCRIPTION
The driver door module (DDM) and passenger door module (PDM) supply battery voltage to the mirror heating element supply voltage circuit upon receipt of a class 2 message from the BCM indicating that the rear defrost system is active. The DDM and PDM also supply a constant ground for the mirror heating elements.
CONDITIONS FOR RUNNING THE DTC
- System voltage between 9.0 and 16.0 volts
- Ignition switch is in the ON position
CONDITIONS FOR SETTING THE DTC
When the DDM and PDM supply battery voltage to the mirror heating element supply voltage circuit and it's shorted to ground.
ACTION TAKEN WHEN THE DTC SETS
The DDM and PDM will ignore the class 2 message and stop supplying battery voltage on the shorted circuit.
CONDITIONS FOR CLEARING THE DTC
When the short circuit is no longer present, the DDM/PDM will clear the current DTC and store the DTC as a history DTC. The history DTC will clear after 50 fault free ignition cycles or in response to a scan tool command.
TEST
